Note that we have now split one fraction into two fractions.
Power Series (Reminder)
Definition 2.1
A power series is a series of the form
n=0∑∞anxn=a0+a1x+a2x2+...+anxn+...
where x is a real (or complex) variable and (an)n∈N is a real (or complex) sequence.
Sometimes the more general notion of a power series is given with a centre x0
n=0∑∞an(x−x0)n.
Definition 2.2
The radius of convergence is defined as the supremum of all numbers ρ≥0 for which the power series converges for all x with ∣x−x0∣<ρ:
ρ:=sup{∣x−x0∣n=0∑∞an(x−x0)n is convergent}
Satzradius of convergence
For the radius of convergence ρ of the power series f(x)=n=0∑∞anxn the following formulas hold:
ρ=n→∞liman+1an (for !,xn,...)
ρ=n→∞limsupn∣an∣1 (for (⋅)n,xn,!,...).
Proofof (i)
We apply the ratio test to the series n=0∑∞anxn. We obtain absolute convergence if
Both formulas follow directly from the ratio test and the root test for (i) and (ii) respectively.
Remark
As with the ratio and root tests, absolute convergence follows from (i) and (ii).
RemarkImportant
On the boundary of the disc of convergence, i.e. in the case ∣x−x0∣=ρ, no statement about convergence is possible. You therefore have to consider this case separately.
Example 2.1
For which x∈R does the following power series converge?
So the power series converges for ∣x+1∣<2(∗) and diverges for ∣x+1∣>2. Now we compute the region of convergence in terms of x for (∗):
⇒(∗)−(x+1)=2⇔−x−1=2⇔−x=3⇔x=−3
⇒(∗)x+1=2⇔x=1
⟹∣x+1∣<2⇔x∈(−3,1)
Now we only have to cover the case ∣x+1∣=2:
n=1∑∞n21(n2+n−n2+1)n(±2)n=...derivation analogous to the one above=n=1∑∞n211+n1+1+n211−n1n(±2)n=n=1∑∞n211+n1+1+n21(±2)(1−n1)n≤n=1∑∞n211+n1+1+n21(±2)(1−n1)n≤n=1∑∞n21
since the fraction in brackets has absolute value ≤1 (numerator ≤2, denominator ≥2).
So we have a convergent majorant. Hence the power series converges for x=1 and x=−3. In summary: the power series converges absolutely for x∈[−3,1] and diverges otherwise.
Example 2.2
Determine the region of convergence of: n=0∑∞n+1(−1)n(x2−1)n.
Show solutionHide solution
We first consider n=0∑∞n+1(−1)nyn(∗) with y:=(x2−1).
Now we determine the radius of convergence using formula (i):
We have obtained the harmonic series and therefore know that the series diverges in this case.
Hence (∗) converges for y∈(−1,1]. Finally, we have to substitute back y=x2−1 and get:
−1<y≤1⇔−1<x2−1≤1⇔0<x2≤2⟹B=[−2,0)∪(0,2].
Power Series Representation
Definition 3.1
The exponential, sine and cosine functions have the following power series representations:
Exp(x) =n=0∑∞n!xn
Sin(x) =n=0∑∞(−1)n⋅(2n+1)!x2n+1
Cos(x) =n=0∑∞(−1)n⋅(2n)!x2n
Example 3.1
Using the power series representation of Exp, compute the following limit: x→0limxExp(x)−1.
Show solutionHide solutionxExp(x)−1=(i)xExp(x)−x1(1)
Let f:Ω⊂Rd→Rn,x0∈Ω,a∈Rn. f has the limita at the point x0 if for every sequence (xk)k∈N in Ω with xkk→∞x0 we have f(xk)k→∞a.
Notation: x→x0limf(x)=f(x0)=a.
Remark
The definition of the limit via sequences above can alternatively be written as follows:
x→x0limf(x)=a⇔∀(xn)n∈N⊆Ω with n→∞limxn=x0, we have n→∞limf(xn)=a.
Definition 4.2(4.1.3)
Let Ω⊂Rd,f:Ω→Rn.
f is called continuous at the pointx0∈Ω if x→x0limf(x)=f(x0)=:a exists.
f is called continuously extendable at the pointx0∈Ω∖Ω if x→x0limf(x)=:a exists.
(In this case the function f extended by f(x0)=a is continuous at the point x0.)
Definition 4.3(4.2.1)
Let f:Ω⊂Rd→Rn. f is called continuous onΩ if f is continuous at every point x0∈Ω.
Remark
To check a given function f:Ω⊂R→R for continuity at the point x0, you therefore have to show the following three points:
f must be defined on Ω
x→x0limf(x) exists, i.e. x→x0limf(x)=∞ and x→x0+limf(x)=x→x0−limf(x)
x→x0limf(x)=f(x0)
Satz(Rules for continuous functions)
Let f:Ω→R and g:Ω→R be continuous. Then
f+g
f−g
fg
gf if g=0
are continuous.
If moreover f:Ω→R and g:f(Ω)→R are continuous, then so is g∘f:Ω→R.
Proofof (i)
This statement follows directly from the sum rule for limits. Let a∈Ω. Since f and g are continuous at the point a, we have
x→alimf(x)=f(a)andx→alimg(x)=g(a).
By the rule "the limit of the sum equals the sum of the limits" it follows that
Hence f+g is continuous at the point a. □
(Remark. The proof for the other rules is analogous.)
Remark
The exponential function, sine, cosine, tangent (between the zeros of the cosine), the hyperbolic functions and the logarithm are all continuous functions.
RemarkImportant
The composition of continuous maps is also continuous. Excluded, of course, are problem points, e.g. the denominator vanishes or the definition of the function changes.
To the left of −2, the function f(x) is a composition of continuous functions and is therefore also continuous. To the right of −2, the function f(x) is a composition of right-continuous functions and is therefore right-continuous, except at the point x=3.
x→(−2)−limx2−2=2
f(−2)=−51
⟹(i)&(ii)2=−51⇒f(x) is not continuous at the point −2.
To the left of 1, the function f(x) is a composition of left-continuous functions and is therefore also left-continuous. To the right of 1, the function f(x) is a composition of continuous functions and is therefore also continuous.
f(1)=1
x→1+limx2−4x+4=1
⟹(i)&(ii)(i)=(ii)⇒f(x) is continuous at the point 1.
Example 4.3
Consider the function
f(x)={8a+16xa2(x+2)for x<2for x≥2
Determine a∈R such that f(x) is continuous at x=2.
Show solutionHide solution
The functions x↦8a+16x and x↦a2(x+2) are continuous. Therefore the function f is continuous away from the point 2, and it is right-continuous at the point 2.
For it to be continuous at the point 2 as well, the following must additionally hold:
It follows that f is continuous at the point x=2 for a=−2 and a=4.
Satzintermediate value theorem
Let f:[a,b]→R be continuous with f(a)≤f(b). Then for every y∈[f(a),f(b)] there exists an x∈[a,b] with f(x)=y.
Example 4.4
Show: the polynomial f(x)=4x3−6x2+3x−2 has a zero lying between 1 and 2.
Show solutionHide solution
Continuity: f is continuous on [1,2] because polynomials are compositions of continuous functions.
We evaluate f at the boundary, i.e. at the points x=1 and x=2:
f(1)f(2)=4−6+3−2=−1<0=32−24+6−2>0
By the intermediate value theorem, f must therefore take all values between f(1) (negative) and f(2) (positive) on the interval [1,2]. In particular, there is an x∗∈(1,2) with f(x∗)=0. So x∗ is the zero of the polynomial we are looking for.
Example 4.5
Does the equation sin(2x)−ex=−5 have a solution in the interval [0,π]?
Show solutionHide solution
We define the function f(x)=sin(2x)−ex+5.
sin(2x)−ex=−5 has a solution in [0,π]⇔f(x)=0
Continuity: since sine and the exponential function are continuous, f is a continuous function.
We evaluate f at the boundary, i.e. at the points x=0 and x=π:
f(0)f(π)=sin(0)−e0+5=4≥0=sin(2π)−eπ+5=−eπ+5≤0
By the intermediate value theorem there is therefore an x∗∈[0,π] such that f(x∗)=0. So x∗ is the solution of the equation in the interval [0,π] that we are looking for.